Preamp: Tube (3 x 12AX7, 2 x 12AU7) Driver Tube(s): 1 x 12AX7, 2 x 12AU7 Power Amp: Tube (6 x 6550) RMS Power Output: 300-Watts @ 2 ohms RMS Power Output: 300-Watts @ 4 ohms Tone Controls: Bass, Mid, Treble Mid Tone Control: 3-Position...

Preamp: Tube (2 x 12AX7) Driver Tubes: (1 x 12AX7, 1 x 12AU7) Power Amp: (4 x 6L6GC) RMS Power Handling: 100 Watts RMS Speaker Outputs: 1 x 8 ohm, 2 x 4 ohm, 2 x 2 ohm Tone Controls: 3-band Mid Tone Control: 3-position rocker switch...

RMS Power Handling: 600 Watts Frequency Response (-3dB): 71 Hz -18 kHz Usable Low Frequency (-10 dB): 40 Hz Nominal Impedance: 4 Ohms Sensitivity: 99 dB Maximum SPL: 127 dB Dimensions (W x H x D inches): 24 x 25 x 16 Weight: 66 Pounds

LF Drivers: 8 x 10” Voice Coil: 2” Magnet Weight (each): 30 oz RMS Power Handling: 2 x 400-Watts (Stereo) RMS Power Handling: 800-Watts (Mono) Frequency Response (-3dB): 58Hz-5kHz Usable Low Frequency (-10dB): 40Hz Nominal Impedance: 2 x...

LF Drivers: 4 x 10” Voice Coil: 2” Magnet Weight (each): 30 oz HF Drivers: Horn/Driver Voice Coil: 1” Magnet Weight (each): 8 oz RMS Power Handling: 500-Watts Frequency Response (-3dB): 48Hz-18kHz Usable Low Frequency (-10dB): 28Hz...

LF Drivers: 6 x 10” Voice Coil: 2” Magnet Weight (each): 30 oz HF Drivers: Horn/Driver Voice Coil: 1” Magnet Weight (each): 8 oz RMS Power Handling: 600-Watts Frequency Response (-3dB): 53Hz-18kHz Usable Low Frequency (-10dB): 42Hz...

LF Drivers: 8 x 10" Voice Coil: 2" Magnet Weight (each): 30 oz RMS Power Handling: 2 x 400-Watts (Stereo) RMS Power Handling: 800-Watts (Mono) Frequency Response (-3dB): 58Hz-5kHz Usable Low Frequency (-10dB): 40Hz Nominal Impedance: 2 x...

Classic Ampeg tone 75 watts RMS power 12″ Ampeg Custom12™ speaker Legacy Ampeg preamp with 3-band EQ Bass Scrambler™ overdrive delivers SVT grind (footswitch optional) Modern flexibility True 60° sound reinforcement monitor angle Aux...

Classic Ampeg tone 150 watts RMS power 15″ Ampeg Custom15™ speaker 1″ HF tweeter Ampeg Ultra Hi/Lo tone shaping Legacy Ampeg preamp with 3-band EQ Bass Scrambler™ overdrive delivers SVT grind (footswitch optional) Modern flexibility True...

4 x 10″ custom US-made Eminence LF drivers 850 watts RMS power handling @ 8 ohms 1″ Eminence APT:50 HF driver w/L-Pad level control Frequency response: 38Hz – 10kHz Max SPL: 127dB Sensitivity: 98dB Weight: 64 lbs

2 x 10″ custom US-made Eminence LF drivers 550 watts RMS power handling @ 8 ohms 1″ Eminence APT:50 HF driver w/L-Pad level control Frequency response: 40Hz – 10kHz Max SPL: 125dB Sensitivity: 98dB Weight: 44 lbs

15″ custom US-made Eminence LF driver 575 watts RMS power handling @ 8 ohms 1″ Eminence APT:50 HF driver w/L-Pad level control Frequency response: 28Hz – 10kHz Max SPL: 128dB Sensitivity: 98dB Weight: 59 lbs